Safety Track™ is a heavy-duty slip-resistant surface finish that can be used on ramps, walkways or anywhere where a risk of slip exists. Safety Track consists of a silicone carbide resin carrier with a self adhesive backing.

• Suitable for use on most substrates including concrete, stone, terrazzo, wood etc. (surfaces should be primed prior to application with Safety Track primer)

• Ideal for use on: Ramps, Walkways, Gantries, Landings, Plant and Machinery, Emergency Service Vehicles, Commercial and Agricultural Vehicles, Marine Decking etc.

• Available in Black (Light Reflectance Value: 4.58)

• Rolls are available to be cut to bespoke sizes.
  Cleats, tiles and stair treads are supplied cut to size
  with radius corners

SAFETY TRACK GRIP STRIPS

STAIRTILE SLIP-RESISTANT STRIPS

Stairtile is a rubber composite material designed to provide a hard-wearing, slip-resistant finish for stairs and floors. It can be installed in a wide range of applications such as shopping centres, car parks and other high usage circulation areas. It can be used as a complete stair covering or as an insert set into terrazzo, wood and concrete. Stairtile is suitable for use in both internal and external applications and is available in a choice of 4 colours.

Information

> Rubber composite - typically used with concrete, terrazzo, wood, stone and marble

> Rebated product fitted with epoxy adhesive and screws

> Cast-in products require no mechanical fixing

> To ensure slip-resistant properties are maintained, any build up of contaminants such as grease must be managed using a thorough and regular cleaning regime

> OT/F profiles are rebated into existing steps. OT/D and OT/RDG profiles are pre-cast into new steps. OT/R profiles can be rebated as a step edge

> Can be supplied pre-drilled (minimum profile width 20mm). Screw head cover plugs supplied

Gauge options

> 6.5mm sanded finish - typically supplied to ready-prepared floor finishes

> 8.0mm sanded finish - typically supplied where further site finishing is required

Safety Track is a slip-resistant surface finish that can be used on ramps, walkways or anywhere where a risk of slip exists. Safety Track consists of a silicone carbide resin carrier with a self adhesive backing. Availability > Available in wide choice of sizes and configurations including rolls, cleats, tiles and stair treads > Rolls are available to be cut to bespoke sizes. Cleats, tiles and stair treads are supplied cut to size with radius corners

Profile Information

• > Suitable for interior and exterior use

• > Resistant to most common chemicals

• > Suitable for use on most substrates including concrete, stone, terrazzo, wood etc. (surfaces should be primed prior to application with Safety Track primer)

• > Available in Black (LRV: 4.58)

• > Ideal for use on: • Ramps • Plant and Machinery • Walkways • Emergency Service Vehicles • Gantries • Commercial and Agricultural Vehicles • Landings • Marine Decking